Titanium reactor cleaning method

Titanium reactor is a very important container in the process of titanium and Titanium Alloy products, which needs to be thoroughly cleaned after use. The use of appropriate cleaning methods can effectively clean the reactor dregs of dirt, but also to protect the reactor. So today I will introduce how to clean the titanium reactor!

1, chemical cleaning: the use of this method first need to clarify the dirt composition of the reactor, if there is not enough experience to support, it is recommended that sampling analysis. Determine the composition of the dirt after the choice of cleaning agent through the experiment to determine the equipment metal does not constitute corrosion. Then through the site set up a temporary circulation device will be cleaning fluid circulation flow in the equipment, wash away the dirt.

2, mechanical cleaning: the use of high-pressure cleaning laboratory reactor device, the 150-200Mpa high-pressure water through the nozzle to flush the dirt.

The two methods have their advantages and disadvantages, chemical cleaning with less labor, short cleaning time, cleaning thoroughly, but also caused the risk of corrosion of the laboratory reactor equipment, mechanical cleaning does not corrode the equipment, the hard scale can be effectively cleaned, but with a long time, labor-intensive. Chemical cleaning is applied in the condition of soft and thin dirt, and mechanical cleaning is applied in the condition of hard and thick dirt.

The glass lining of the reaction kettle, although it has a certain impact strength, but it is, after all, a kind of brittle materials, harsh working conditions do not allow the existence of any small defects. Therefore, in order to ensure the use of laboratory reactor equipment performance, in the transportation, storage and installation process, effective measures should be taken.